Category: Kamailio

Using Asterisk as a SBC or transcoder may not be the right choice, especially if you follow the saying “use the right tool for the job”, and Asterisk is not precisely the right tool on these cases.

When you have options like FreeSwitch and SEMS, Asterisk seems to be disproportional and awkward to use, but it is so widely known that sacrificing flexibility to avoid investing time in learning a new technology (in case you don’t know FS or SEMS already) seems like a good alternative.

Having said that, let’s assume the following rules for our setup:

• Our local network only accepts G722 codec between users, because, we enforce HD quality calls and we have lots of bandwidth at our disposal.
•  We offer a local numbering plan and we can call between users of the network.
• We also offer external calls to PSTN. For this purpose, we have a gateway that supports only PCMA/PCMU and G729. We don’t have the licence to do G729 in all of our softphones reason why we use PCM to reach our gateway from the softphones.
• Asterisk will act as a transcoder, translating from G722 to PCMA/PCMU and backwards.
• Asterisk will only take part of the SIP conversation when Kamailio detects that we are dialing to a number that does not belong to our internal numbering plan.

And from the SIP perspective

• Kamailio is listening on port 5075 and serving on the net 192.168.2.0/24, using the IP 192.168.2.97.
• Asterisk is listening on port 5080.
• The PSTN gateway is located at 192.168.2.20.
• Kamailio is accepting every registration request without any kind of authentication.
• Username format is not being enforced, so I would recommend that you use something similar to 1000, 1100, etc.
• I’m from Paraguay, and locally we dial “+5959” to access the mobile network. Change this pattern to your dialing prefix so that it makes sense to your gateway.

Basically, the magic on the Kamailio side happens approximately here:

kamailio.cfg

	
request_route {
# per request initial checks
	route(REQINIT);

	# NAT detection
	route(NATDETECT);

	# CANCEL processing
	if (is_method("CANCEL")) {
		if (t_check_trans()) {
			route(RELAY);
		}
		exit;
	}

	# handle requests within SIP dialogs
	route(WITHINDLG);

	### only initial requests (no To tag)

	t_check_trans();

	if (!is_method("REGISTER|INVITE|ACK|BYE|CANCEL|PRACK")) {
		sl_send_reply("405", "Method not allowed");
                exit;
	}

	# authentication
	route(AUTH);

	# record routing for dialog forming requests (in case they are routed)
	# - remove preloaded route headers
	remove_hf("Route");
	if (is_method("INVITE|SUBSCRIBE"))
		record_route();

	# handle registrations
	route(REGISTRAR);

	if ($rU==$null) {
		# request with no Username in RURI
		sl_send_reply("484","Address Incomplete");
		exit;
	}

	if (!is_method("INVITE")) {
		route(RELAY);
		exit;
	}

	if ($rU =~ "^5959") {
		if (route(IS_FROM_SBC))
			route(FROM_SBC);
		else
			route(TO_SBC);

		exit;
	}

	route(ENFORCE_CODEC_POLICY);
	route(LOCATION);
}

route[ENFORCE_CODEC_POLICY] {
	# enforce g722 codec in all calls
	if (!sdp_with_codecs_by_name("G722")) {
		sl_send_reply("488", "Use G722!");
		exit;
	}

	# make sure g722 is the only code offered
	sdp_keep_codecs_by_name("G722");
}

route[IS_FROM_SBC] {
	if ($si =~ SBC_IP && $sp == SBC_PORT) 
		return 1;
	else
		return 0;
}

route[TO_SBC] {

	xlog("L_INFO", "Going to SBC");

	# set the destination URI to our SBC
	$du = "sip:" + SBC_IP + ":" + SBC_PORT; 

	# We store the original request URI.
	append_hf("X-RURI: $ru\r\n");

	route(RELAY);
}

route[FROM_SBC] {

	# At this point, the SDP offer should be fixed with the right codec information
	xlog("L_INFO", "Coming from SBC");

	if (is_present_hf("X-RURI")) {
		$ru = $hdr(X-RURI);
		xlog("L_INFO", "New URI is [$ru]");
	}
	else {
		xlog("Weird, I couldn't find X-RURI hdr");
	}

	rewritehost(PSTN_GW_IP);
	rewriteport(PSTN_GW_PORT);

	route(RELAY);
}

And, on the Asterisk side we have got two things to modify:

1. sip.conf: we have to add our Kamailio instance as a trusted peer, with no authentication and with the right codec definition
2. extensions.ael: yes, I use AEL instead of the common extensions.conf, mostly because I hate extensions.conf syntax. If you chose to use .conf, no problem. It should work using whatever you choose.

sip.conf

[general]
context=public                  ; Default context for incoming calls. Defaults to 'default'

bindaddr=0.0.0.0
bindport=5080

[kam_transcoder]
type=friend
host=192.168.2.97
port=5075
disallow=all
allow=g722
allow=ulaw
allow=alaw
context=transcoder
canreinvite=no
insecure=invite

extensions.ael

context transcoder {

        _.      => {

                Set(SIP_CODEC=alaw);
                Set(RURI=${SIP_HEADER(X-RURI)});

                NoOp(${RURI});
                if ("${EXTEN}" != "h") {
                        SipAddHeader(X-RURI: ${RURI});
                        Dial(SIP/${EXTEN}@192.168.2.97:5075,40,rt);
                }
        }
}

The full list of files are available on my github, here.